With the promotion of new rural construction and the improvement of living standards, more and more rural families are considering the installation of domestic villa elevators in self-built houses。Pastoral life, fresh air, and home elevators up and down the stairs are many people's dream life scenes, and the best choice for home care。So what aspects should we pay attention to when choosing a home elevator for self-construction？和Hunan Villa elevatorMake it up and read it!
  First of all, we must clearly choose the classification of home elevators。At present, there are three mainstream choices for home elevators: traction elevators, screw elevators and hydraulic elevators。Screw elevator relies on the mutual movement between the nut and the screw to run the elevator car, limited by the structure, the general running speed is slow, the three screw elevator has the car design, light weight noise, more suitable for duplex building, LOFT apartment type, on the villa installation。Due to many problems, hydraulic elevators have almost disappeared in the home field, and more applications are in the factory workshop。The traction elevator is pulled by the traction engine, there are checks and balances between the car and the counterweight, the operation is stable, the technology is mature, and the energy saving。However, the requirement of civil construction size is higher: pit depth, top height and well width depth size。The size of the elevator position reserved for the installation of self-built houses is sufficient, and the depth of the pit is sufficient, so the suitable installation is the traction elevator。
 

  After choosing the type of elevator installation, because the elevator shaft of the self-built house is built at the same time as the house, the owner can contact the elevator manufacturer technicians to design the shaft at the beginning of the construction of the house。The depth of the bottom pit of the general traction elevator, depending on the technical ability of the manufacturer, requires between 150mm450mm, the top height is required to be above 2500mm, and what should be noted here is that the bottom pit should pay attention to waterproof。Since the home elevator is deeply customized, the car area as long as it does not exceed 1.6 square meters, well width and depth can be matched according to demand。At the same time, according to the guidance of the technical personnel of the manufacturer, the construction side has determined the position size of the inner ring beam, the door head beam, the floor swill beam, the main engine beam, etc。After the elevator shaft is completed, contact the manufacturer's technical personnel to check the size, and you can arrange the elevator production and installation。
  After determining the size of the well, you can determine the door opening method, counterweight method, interior decoration and so on with the manufacturer。The door opening method of the home elevator, according to the principle of convenient use, is selected in order of automatic center door, side door, hand door。General elevator door width to more than 700mm for convenience, 700mm wide door as an example, the automatic center door on the width of the well is high requirements, need to reach more than 1550, 13001500 can choose the side door, if the width of the well is 1300, choose the hand door design。Determine the car decoration, such as hairline stainless steel, mirror etched stainless steel, titanium gold, rose gold, solid wood, etc。

   In the middle and late stages of the decoration, the elevator can be installed, and the general approach will be about the completion of the installation week, and then the elevator door stone, door cover and other decoration。In order to avoid the collision of the elevator during the decoration period, such as carrying heavy objects, the elevator manufacturer will generally run the car to the top floor first, and then shut down the ladder。After the decoration is completed, before the owner moves in, contact the manufacturer to open the elevator and start using it。Generally, after the installation of the elevator, the regular manufacturers will leave 30-50 days of maintenance free renovation warranty period, and the owners will begin to enter the normal maintenance and quality assurance process after they move in。

   Alpha Elevator Co., Ltd. and Hunan Alpha Elevator Engineering Co., Ltd. have the qualification of elevator maintenance Level A and installation level A;There are 167 employees，Among them: 4 engineers,6 engineers,Quality inspector 9 people,Security personnel 11,Installation and maintenance personnel 117 people，Purchasing and warehousing 5 people，Detection experiment 2 people，Logistics and distribution, accounting and personnel administration management of 13 people;45 sets of various installation equipment and testing instruments。Hunan ElevatorBuy, elevator engineering, elevator maintenance to find Alfa elevator。