Hunan elevator projectInstallation of construction procedures

　　(1) Inspect the civil works of the elevator shaft to determine whether its location and size meet the technical documents and other requirements provided by the elevator manufacturing unit

　　(2) Set railings on the reserved hole of the floor door, and set temporary cover plates on the reserved hole leading from the equipment room to the well

　　(3) Install guide rails after the well is placed on the reference line

　　(4) Installation of equipment in the machine room, piping and wiring in the well

　　(5) Install layer doors and other related accessories after car assembly

　　(6) After the power no-load test run is qualified, load test run

      (7) Sort out all records and prepare for application。

Hunan elevator projectGeneral installation process

　　1.Preparation before installation

　　2.Lofting line, hanging line

　　3.Installation of elevator rail

　　4.Installation of the car

　　5.The installation of weights and buffers

　　6.Installation of tractor and guide wheel

　　7.Installation of trailing wire rope

　　8.Installation of floor door and door pulley

　　9.Installation of safety clamps and governor

　　10.Installation of automatic door machine

　　11.Installation of electrical parts

　　12.调试

An elevator is a means of transport that consists of cumbersome safety electrical circuits and mechanical components。To strengthen elevator safety inspection and supervision and management to prevent accidents, The State Council promulgated the "Special Equipment Safety Supervision Regulations" in 2003, which clearly stipulatesHunan elevator projectThe installation and maintenance is installed by the elevator manufacturer or commissioned by the installation unit with installation qualifications。

Hunan elevator projectDaily maintenance should be carried out by the manufacturer or professional company

　　1.The elevator consists of two parts: mechanical and electrical。If the elevator is not maintained daily, the safety of the elevator will not be guaranteed, if the elevator needs to be refueled without refueling, it will cause wear and damage to the elevator mechanical components, so that the service life of the elevator is greatly shortened, and the elevator can not be used normally。

      2.In the process of using the elevator, some elevator users in order to reduce costs and save money, find temporary workers or unqualified companies to do elevator maintenance, once the safety problem even the responsible unit can not be found。If it is maintained by the elevator manufacturer or a qualified professional company, on the one hand, the maintenance technology and quality are guaranteed, and on the other hand, once there is a problem, someone is responsible。